Sewing: learn the point of slipper

Sewing: learn the point of slipper


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

While it is used in embroidery mainly for decorative purposes, we use the seam stitch to make hems or join two fabrics. This point is worked from left to right. Below, you will find the explanations for making a liner stitch on a hem. 1. Make your hem by folding the actu: 739845 fabric inwards. Then make a knot on the end of the thread, then slide the needle into the hem. Make it stand out on the right side of the latter a few millimeters from the edge of the hem.
2. Stitch the news: 739845 main fabric on the right of the first stitch using a small stitch made from right to left. This should be as small as possible.
3. Pull the needle to tighten the thread, then make a new small point on the right side of the hem, also stitching from right to left. This point should be located at the same height as the initial needle exit point.
4. Repeat steps 2 and 3 along the hem making sure that the stitches on the one hand above the hem and on the other hand on the hem are aligned and of the same length.


Comments:

  1. Daemon

    I can talk a lot on this issue.

  2. Gared

    I am sorry, that has interfered... This situation is familiar To me. I invite to discussion.

  3. Kay

    the most valuable answer

  4. Pulan

    Well done, this very good idea is just about

  5. Gal

    A friend gave a link, I often don’t read something like that, but I didn’t regret it here!

  6. Hovsep

    This just conditionality, no more

  7. Maed

    I confirm. And I ran into this. We can communicate on this theme. Here or at PM.

  8. Herrick

    I apologize, but in my opinion you are wrong. I can prove it. Write to me in PM, we will discuss.



Write a message